PKVALVE

본문 바로가기 주메뉴 바로가기

취급제품PRODUCTS

Cryogenic Valve

  • 프린트
  • 이메일
  • 페이스북
  • 트위터

pdf아이콘 PDF 다운로드

CRYOGENIC VALVE

Cryogenic Service Valves

Cryogenic Gate Valves are specially engineered and designed for piping systems used in the storage and transport of liquefied gasses such as LNG and liquid nitrogen and oxygen. The main structural feature of these valves is an extended bonnet with an enclosed vapor chamber to isolate packing from the cryogenic fluid and thereby allow packing to function properly. PK Vlave Cryogenic designs and liquid nitrogen testing facilities go much further to assure proven performance in this most demanding application.

Cryogenic Service Valves

Material

Materials suitable for working condition must be adopted for low temperature valves. Especially in petrochemical industry, the types of fluids to be processed are different according to each section even in the same plants. At the same time, the temperatures used are also different. A full consideration must be paid to the selection of material.

Body And Bonnet

As for the materials constituting the low temperature valves, special consideration must be paid to the materials used at pressure parts as in the case of body and bonnet.

BODY MATERIAL, SERVICE TEMPERATURE, BOLT, NUT 의 정보가 있는 Body And Bonnet표입니다.
BODY MATERIAL SERVICE TEMPERATURE BOLT NUT
CARBON STEEL(GRADE LCB) -50℉ -46℃ A320 GR. L7 A194 GR. 4
C-1/2Mo(GRADE LC1) -75℉ -59℃ A320 GR. L7 A194 GR. 4
2 1/2NI(GRADE LC2) -100℉ -73℃ A320 GR. L7 A194 GR. 4
3 1/2NI(GRADE LC3) -150℉s -101℃ A320 GR. L7 A194 GR. 4
TYPE 304(GRADE CF8) -425℉ -254℃ A320 GR. B8 A194 CR. 8
TYPE 304(GRADE CF3) -425℉ -254℃ A320 GR. B8 A194 CR. 8
TYPE 316(GRADE CF8M) -425℉ -254℃ A320 GR. B8 A194 CR. 8
TYPE 316L(GRADE CF3M) -425℉ -254℃ A320 GR. B8 A194 CR. 8

Trim

Following the body and bonnet, selection of materials for main parts such as stem, seat ring, and gland is very important. We adopt austenite stainless steel.

Packing

Teflon or other plastic packing protecting from shinkage by large cloumn of insulating gas.

Seating Surface

Stellite 6 for all medium and high pressure application prevents seizing and galling

Bolt and Nut

Material for bolts at low temperatures requires especially strength. Therefore, rigidity at low temperature is demanded and brittleness at low temperature of steel material can be improved generally by heat treatment. We use it according to ASTM standard.

Table of Liquefied Gasses

TYPE, BOILING POINT의 정보가 있는 Table of Liquefied Gasses표입니다.
TYPE BOILING POINT
NATURAL GAS, LNG -270℉ -168℃
METHANE, CH4 -258℉ -162℃
OXYGEN, O2 -296℉ -183℃
ARGON, AR -303℉ -186℃
CARBON DIOXIDE, CO2 -314℉ -192℃
NITROGEN, N2 -320℉ -196℃
HYDROGEN, H2 -423℉ -253℃
HELIUM, HE -452℉ -269℃

Production Materials

ASTM : A351-CF8, CF8M, CF3, CF3M or Equivalent

UNIT : NPS

BODY MATERIAL, 150, 300, 600, 900, 1500의 정보가 있는 Production Materials표입니다.
BODY MATERIAL 150 300 600 900 1500
GATE 2-60 2-48 2-36 2-24 2-16
GLOBE 2-24 2-24 2-14 2-14 2-10
SWING CHECK 2-48 2-36 2-36 2-24 2-16
BUTTERFLY 3-48        
페이스북 트위터

경남 창원시 성산구 공단로 80 / 서울사무소 서울시 강남구 영동대로 511 트레이드타워 1102호 COPYRIGHT ⓒ 2016 PK VALVE CO., LTD. ALL RIGHTS RESERVED